HSF Magnetic No-Touch Tools

Complete Hands-Free Magnetic Safety Solutions for Industrial Metal Handling

HSF Magnetic No-Touch Tools are engineered to eliminate direct hand contact during metal handling tasks in high-risk industrial environments. By using high-strength magnetic technology, these tools allow operators to lift, guide, position, align, and retrieve metal objects while keeping hands safely away from crush zones, pinch points, sharp edges, and suspended loads.

Designed for real industrial conditions, HSF magnetic tools improve hand safety without compromising control, precision, or productivity across construction, fabrication, oil & gas, manufacturing, and maintenance operations.

The Hand Safety Challenge

Manual handling of steel plates, pipes, beams, fixtures, and scrap places workers at constant risk of injury. Many hand injuries occur not during lifting alone, but during guiding, alignment, positioning, welding preparation, and cleanup tasks where hands must be close to unstable or sharp metal.

Confined spaces, crane operations, vibration, and limited visibility further increase the risk. Traditional tools and manual techniques do not provide sufficient distance from danger zones, making magnetic no-touch solutions essential for modern industrial safety programs.

The HSF Magnetic No-Touch Solution

HSF Magnetic No-Touch Tools replace direct hand contact with controlled magnetic engagement. Using permanent magnets, switchable magnets, and electromagnetic systems, operators can safely interact with metal objects from a distance while maintaining precise control.

This approach significantly reduces injury risk, lowers physical strain, improves accuracy, and integrates seamlessly into existing industrial workflows

Range of HSF Magnetic Tools

HSF Riggerlock Magnetic Hand Safety Tool – Flex (with D-Handle)

This tool is designed for guiding and controlling heavy or irregular metal loads during crane lifts and rigging operations. The flexible joint absorbs movement and vibration, while the D-handle provides a secure two-hand grip for precise load guidance.

It is widely used in steel yards, construction sites, and fabrication environments where safe control of suspended loads is critical.

Part Numbers:

• HSF-RL-FD500

• HSF-RL-FD700

• HSF-RL-FD1200

Key Features:

• High-strength permanent magnetic base

• Flexible shaft for controlled load guidance

• D-handle for two-hand grip and stability

• Designed for crane-guided and suspended loads

• Keeps hands away from crush and pinch zones

• Suitable for high-vibration industrial environments

HSF Riggerlock Magnetic Hand Safety Tool – Flex (without handle)

The handle-less Flex variant is designed for confined or restricted spaces where standard handles cannot be used. It provides precise magnetic control for guiding beams, pipes, and components near machinery or structural elements.

This tool is commonly used in fabrication shops, utility installations, and assembly environments requiring high accuracy in tight spaces.

Part Numbers:

• HSF-RL-FG500

• HSF-RL-FG700

• HSF-RL-FG1200

Key Features:

• Permanent magnetic engagement

• Handle-less slim design for confined spaces

• Flexible body allows angular positioning

• Used for guiding pipes, beams, and steel components

• Improves safety near machinery and structures

HSF Riggerlock Magnetic Hand Safety Tool - Switch

The RiggerLock Switch tool offers controlled magnetic engagement and release for tasks such as alignment, temporary positioning, and tack welding. Operators can activate or deactivate the magnet as required, improving safety and flexibility.

It is ideal for steel erection, welding setups, and rigging operations where intermittent magnetic contact is needed.

Part Numbers:

• HSF-RL-SW500

• HSF-RL-SW700

• HSF-RL-SW1200

Key Features:

• Switch ON/OFF magnetic control

• Enables precise positioning and alignment

• Prevents unwanted magnetic attraction

• Suitable for tack welding and fabrication tasks

• Improves safety during disengagement.

HSF Riggerlock Quick-Detach Magnetic Hand Safety Tool

This tool is designed for applications where rapid disengagement is required after positioning or alignment. The quick-detach mechanism allows operators to release the magnetic connection safely without entering hazardous zones.

It is especially useful in crane operations, structural steel alignment, and suspended load positioning.

Part Numbers:

• HSF-RL-QD500

• HSF-RL-QD700

• HSF-RL-QD1200

Key Features:

• Quick-detach magnetic release mechanism

• Designed for crane and rigging operations

• Allows safe disengagement without entering danger zones

• Reduces time spent near suspended loads.

HSF Magnetic Hand Lifter

The HSF Magnetic Hand Lifter is a compact, high-strength magnetic tool designed for lifting, moving, and positioning steel sheets and fixtures without direct hand contact. Its ergonomic design improves grip and control while protecting hands from sharp edges and hot surfaces.

Commonly used in fabrication shops, metalworking units, and maintenance environments.

Part Number:

• HSF-MG004

Key Features:

• Permanent magnet lifting system

• Lifting capacity up to 550 lbs

• Ergonomic D-handle for controlled lifting

• Manual engage/disengage lever

• Heavy-duty alloy steel construction

HSF Loadgrab Maghead Lifter

The LoadGrab MagHead Lifter is designed for safe lifting and pulling of ferrous materials using a strong magnetic head and ergonomic handle. It enables hands-free handling while maintaining precise control of the load.

This tool is used in fabrication, construction, and industrial maintenance operations.

Key Features:

• Magnetic lifting head

• Designed for vertical lifting of ferrous materials

• Ergonomic handle for controlled handling

• Improves safety during lifting tasks

HSF Loadgrab Maghead T-Handle Push/Pull Tool (Extendable)

This extendable push-pull tool features a magnetic head designed to guide, position, and control metal objects from a safe distance. The T-handle provides balanced control, while the extendable shaft increases reach and safety.

It is ideal for crane guidance, steel positioning, and hands-free handling in hazardous zones.

Key Features:

• Magnetic head for push and pull operations

• Extendable shaft (up to 90 inches shown)

• T-handle for two-hand control

• Designed for safe positioning of steel objects

HSF Loadgrab Maghead D-Handle Push/Pull Tool

Designed to prevent hands and bodies from entering dangerous pinch and crush zones, this tool combines a strong magnetic head with a D-handle grip. It allows operators to push, pull, and position heavy steel objects safely.

Commonly used in construction, fabrication, and industrial alignment tasks.

Key Features:

• Fixed-length magnetic push/pull tool

• D-handle for strong grip

• Used for guiding heavy steel materials

• Prevents direct hand contact

HSF Loadgrab Magnetic Lifter IV

This is a high-strength magnetic lifter with a D-handle and rugged alloy steel construction. It is designed for lifting and positioning steel plates and components with improved control and reduced hand injury risk.

Used in fabrication shops, construction sites, offshore operations, and maintenance environments.

Part Number:

• HSF-MG004

Key Features:

• Permanent magnet lifting system

• Lifting capacity up to 550 lbs

• Ergonomic D-handle for controlled lifting

• Manual engage/disengage lever

• Heavy-duty alloy steel construction

HSF Loadgrab Magnetic Lifter V–Switch Magnet

The Lifter V features a switch-controlled magnet with up to 550 lbs lifting capacity. It allows safe engagement and release during heavy lifting operations while minimizing pinch and crush hazards.

Widely used in steel workshops, recycling yards, oil & gas sites, and rigging operations.

Part Number:

• HSF-MG005

Key Features:

• Switch-controlled magnetic lifter

• 550 lbs lifting capacity

• V-grip ergonomic handle

• Alloy steel body with powder coating

• Hands-free lifting and positioning

HSF Electromagnet Lifter

The HSF Electromagnet Lifter uses a rechargeable battery and electromagnetic control for safe lifting and demagnetization. One-hand operation allows precise handling during welding preparation, alignment, and metal retrieval.

Ideal for fabrication, welding, and industrial maintenance environments.

Key Features:

• Rechargeable electromagnetic system

• One-hand operation

• Controlled magnetization and demagnetization

• Suitable for precision positioning and welding tasks

HSF Magnetic Pick-Up Tool

This tool is designed for collecting loose metal debris such as screws, bolts, and shavings. It features a strong permanent magnet and a spring-loaded release mechanism for easy disposal without hand contact.

Essential for workshops, construction sites, and industrial cleanup tasks.

Key Features:

• Permanent magnet for debris pickup

• Spring-loaded release mechanism

• Designed for bolts, screws, and metal scrap

• Improves housekeeping safety

• Suitable for precision positioning and welding tasks

HSF Magnetic Scrap Lifter

The Magnetic Scrap Lifter features extended reach, a switchable magnet, and a pivoting head for collecting metal scrap from floors, bins, and tight areas. Built from durable steel and aluminium for industrial use.

Used for recycling, workshop cleanup, and maintenance operations.

Key Features:

• Switchable magnetic pickup

• Lifts up to 30 lbs of ferrous material

• 90° pivoting magnetic head

• Extended reach design

• Ideal for scrap collection and cleanup

HSF Magnetic Scrap Picker

This tool is designed for fast, hands-free collection of nails, screws, and metal scraps from industrial floors. The ergonomic handle reduces bending and fatigue, improving safety and efficiency during cleanup.

Commonly used in factories, machine shops, and construction sites.

Key Features:

• Strong permanent magnet

• Quick-release scrap disposal

• Designed for nails, shavings, and metal waste

• No power required

HSF Long Reach Magnetic Tool

The Long Reach Magnetic Tool is designed to retrieve ferrous debris from hard-to-reach areas such as under machines, benches, and equipment. Its long handle improves ergonomics and keeps hands away from hazards.

Used in workshops, warehouses, and maintenance areas.

Key Features:

• Long handle for extended reach

• Permanent magnet base

• Spring-loaded debris release

• Reduces bending and ergonomic strain

HSF Loadgrab Maghead T-Handle Push/Pull Tool

This variant features a straight handle with a magnetic head for controlled pushing, pulling, and positioning of metal objects. It allows operators to guide loads safely without placing hands near danger zones.

Used in fabrication, construction, and industrial alignment operations.

Key Features:

• High-strength magnetic head for secure grip

• Ergonomic T-handle for two-hand control

• Designed for safe push and pull operations

• Keeps hands away from pinch and crush zones

• Enables precise positioning of metal objects

• Rugged construction for industrial environments

Safety Benefits across all HSF Magnetic Tools

HSF Magnetic No-Touch Tools help organizations:

• Eliminate direct hand contact with metal loads

• Reduce crush, pinch, and impact injuries

• Improve control during lifting, guiding, and positioning

• Minimize bending, strain, and fatigue

• Support zero-hand-injury safety initiatives

Industrial Applications

HSF Magnetic Tools are trusted across:

• Oil & gas and offshore operations

• Construction and steel erection

• Fabrication and welding workshops

• Manufacturing and maintenance plants

• Shipyards and heavy engineering

• Recycling and scrap handling facilities

Why HSF?

HSF, a brand of PSC Hand Safety India Private Limited, focuses on delivering practical, field-tested hand safety solutions. Every magnetic tool is engineered for durability, reliability, and real-world industrial performance.

HSF tools are not accessories, they are essential safety and productivity tools for hazardous metal handling operations.

Talk to HSF Safety Experts

Protect your workforce and reduce hand injury risks with HSF Magnetic No-Touch Tools. Our team will help you choose the right magnetic safety solution for your industrial application.

📱 Phone:
+917386110618

📧 Email:
iinfo@handsafetyfirst.com

🌐 Website:
www.handsafetyfirst.com

Announcement: PSC Hand Safety India Pvt Limited has entered into a definitive agreement to acquire the brand Hand Safety First effective on Oct 31, 2025